Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated
v1.0.0 – 2020-03-16
Configuration guide for Windows and macOS to use with our Editor & Librarian plug-ins
AVID Pro Tools User Guide
Adobe Acrobat Reader PDF format
Checkout the plug-in user manual prior to this guide, so you have the knowledge to setup the plug-in properly.
Also, as we are not AVID Pro Tools experts, we engourage you to read the Pro Tools manual in order to fully understand your DAW.
We hope you have taken all the necessary precautions prior to using our product, like making a full backup of your synthesizer memory.
Our company & plug-in has nothing to do with AVID nor Blue Cat companies, so please don’t bug them if you encounter issues with the plug-in – open a support ticket in your account page in such case. You can find support details at the end of this document.
Support and plug-in updates are free for life to anyone who has bought the license from our store
AVID Pro Tools
Open your DAW and we will make sure that MIDI ports are disabled for those ports, where your synthesizer is connected at. This will ensure that your DAW won’t crash and we won’t be getting double data in to the DAW processing loop.
Setup -> Peripherals…
Check that the physical MIDI interface’s port is not being used by any of the MIDI Controllers “Receive From” and “Send To” port assignments. See image below.
Click OK to close and open MIDI Studio Setup.
Setup -> MIDI -> MIDI Studio Setup…
Now, we want to create new device for our synthesizer using the virtual connections we made earlier in our Setting MIDI Devices guide. If you are on macOS, you can create the device with physical ports instead.
Click Create  -> add Instrument Name, Manufacturer, Model, Input Port & Output Port .
Windows: Input Port; JP-8000 vMIDI In / Output Port: JP-8000 vMIDI Out .
macOS: Input and Output Ports; physical Device where the synthesizer is connected.
Send channels  should be set to represent the number of available channels / parts of your synthesizer, in this case we have 3 active send channels. Receive channels  can be set to all 16.
Final check before we move on. Open Setup -> MIDI -> MIDI Input Devices…
Windows: Disable Physical Ports from the DAW MIDI Input Devices list  where the synthesizer is connected. Also, I have disabled JP-8000 vMIDI Out from the list, because we use to virtually route the MIDI out to synthesizer via MIDI-OX.
Add new tracks to Edit window
Start by creating new tracks, which we will accociate with the plug-in, MIDI channels and Audio Inputs. Track -> New… See image below.
From the image below, you can see how I have assigned new tracks for this setup. I have one Instrument track, two MIDI tracks and one Audio Track.
Once your setup is done, click Create.
New tracks will now appear in the Edit window.
I’m going to rename my tracks to make more sense while working with the project. Click Rename… 
Assign MIDI ports & channels
Before we proceed with the plug-in initialization, it is important to assign the MIDI track channels properly.
In JP-8000 ch1 we have set the MIDI Out  to Roland JP-8000 1 -> channel-1.
In JP-8000 ch2 we have set the MIDI Out  to Roland JP-8000 1 -> channel-2.
Insert Blue Cat’s PatchWork plug-in and Our Plug-in
Select the instrument channel (JP-80×0) we renamed previously. Click on the Insert slot A and choose multichannel plug-in -> Instrument -> Blue Cat’s PatchWork Synth from the list.
Plug-in window will now appear. Enter plug-in Preferences  and double check your VST plug-ins directory path . Click Close to confirm your changes.
Click the PRE area + -sign  to open the menu and select Load VST…
New window will open up, navigate to the location of your VSTplugins  and locate our plug-in which you wish to use .
Click Open once you have located the plug-in.
Plug-in window will now appear.
MIDI IN / MIDI OUT
Now we can select the Physical MIDI input port which receives MIDI data from your synthesizer.
And then we choose the Physical MIDI Out port which sends data to the synthesizer MIDI input.
Plug-in will now attempt to establish connection with the synthesizer, so it might take some time if your settings are not right or if you chose a wrong MIDI port by mistake. You should see plug-in saying PROCESSING… somewhere in the plug-in interface and also ABORT PROCESS button will appear.
If all of the settings are correct, you will see “Plug-in is ready to go!”  message in the plug-in display.
If something is wrong with your settings, plug-in will say “No response from JP!”  and that indicates something is wrong with your synth settings, MIDI device or Pro Tools Preferences.
Once the connection is in, you should sync the data with your hardware. Usually this function can be ran from the patch librarian tab / page of the plug-in & “Sync Data From HW” button. Check the plug-in user manual to learn more.
We can now close the plug-in window and move on.
NOTE #1: Check troubleshooting from the plug-in, daw or synthesizer manual if you can not establish connection. You can also seek help from our support site if you can’t find out what is causing error in your setup.
Automating Plug-in Parameters
Close the plug-in window click right mouse button over the plug-in name . This will open up a menu where we can see lots of different functions. Choose Params Map  -> Group  -> Parameter you want to automate . – See image below.
To confirm your parameter selection, do the same action again but don’t select any parameters now. Just see how the previously selected parameter now has (Control 01) assigned to it. Remember that. – See image below.
Now click the Plug-In Automation Enable  button in the PatchWork plug-in window.
Choose parameters  from the list which you need to automate and click Add >>  to move the in the enabled list.
Once you have added the necessary parameters, click OK to finish parameter configuration.
To view the parameters assigned, click the little arrow in the bottom left corner of the instrument track  and then click the excisting parameter  to open a menu. Now choose the JP-80×0 (fx a): Blue Cat’s PatchWork Synth  and choose the control  you want to automate.
As I previously mentioned, remembering these parameters is important. Control 01 in this case controls the Lower Panel Filter Cutoff.
Parameter is now assigned to the Edit window  and I did draw some automation lanes with the Pencil tool . See image below.
Pick a parameter you want to automate and start drawing in OR move the knobs in the plug-in while recording to make automation!
You can also see from the image above, how I have created some notes to JP-8000 ch1 and JP-8000 ch2 to trigger sound from both layers individually.
Note #1: You should always put MIDI blocks in the MIDI tracks because our plug-in can not talk to DAW about delay compensation. This is because we do not generate any audio with our plug-in.
Finishing it up!
Final step is to modify the Audio track, so we can hear the synthesizer in action. First, we want to choose the right input  where our synthesizer is conneted . Lastly, toggle on track monitoring to hear the synth . See image below.
Note #1: You might have routed your Audio Output from the synth itself to external mixing desk or speakers, so make sure you power those units on. Otherwise there won’t be any sound because our plug-in does not transmit any audio data to the DAW.
Thats it for the AVID Pro Tools user guide. We hope you find this useful.
You have some suggestions? Yes please!
We are always open for new suggestions and ideas regarding to our products. Send your suggestions to us because it will make our products better.
Head down to our main site and drop your idea in, we will have a look at it and let you know if it can be done.
Plug-in user manuals: https://docs.mysteryislands-music.com/
Plug-in updates: https://www.mysteryislands-music.com/downloads/
loopMIDI and MIDI-OX are both shipping their own user manuals, so please refer to their documentary to learn more about how they work.
If you have found an error in this document, open a support ticket so we can have it fixed ASAP.