Bitwig Studio Config - Everything Runs like well Oiled Machine

User Guide for Bitwig Studio

Configuration Knowledge Level

Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated

Intro

v1.0.0 – 2020-03-14
Configuration guide for Windows and macOS to use with our Editor & Librarian plug-ins

Bitwig Studio User Guide

Adobe Acrobat Reader PDF format

In this little Bitwig Studio User Guide you will find the instructions to get our plug-in to work with Bitwig Studio with ease. This is universal tutorial for all of our plug-in, but we are using our Roland JP-80×0 plug-in in this guide.

Checkout the plug-in user manual prior to this guide, so you have the knowledge to setup the plug-in properly.

Also, as we are not Bitwig Studio experts, we engourage you to read the Studio manual in order to fully understand your DAW.

We hope you have taken all the necessary precautions prior to using our product, like making a full backup of your synthesizer memory.

et|icon_info_alt|p

Disclaimer

Our company & plug-in has nothing to do with Bitwig company, so please don’t bug them if you encounter issues with the plug-in – open a support ticket in your account page in such case. You can find support details at the end of this document.

Support and plug-in updates are free for life to anyone who has bought the license from our store

Bitwig Studio

Preferences

Open your DAW and enter Preferences. We will make sure that MIDI ports are disabled for those ports, where your synthesizer is connected at. This will ensure that your DAW won’t crash and we won’t be getting double data in to the DAW processing loop.

Click Bitwig logo [1] -> Settings [2] -> Controllers

Bitwig Studio Config - Open Settings

Bitwig Studio Config – Open Settings

Click to Add Controller [1], set type to MIDI Keyboard [2] and choose Add [3].

Bitwig Studio Config - Add Keyboard as a Controller

Bitwig Studio Config – Add Keyboard as a Controller

Set MIDI input port [1] to JP-8000 vMIDI In [2] which we have created in our Setting MIDI Devices guide.

macOS users can select the physical MIDI port instead.

Bitwig Studio Config - Add Virtual Port as a Controller (Windows)

Bitwig Studio Config – Add Virtual Port as a Controller (Windows)

Click Syncronization [1] tab and set MIDI clock to JP-8000 vMIDI Out [2] port if you wish to sync the synthesizer delay etc. to the DAW tempo clock.

macOS users can set the physical MIDI port instead.

Bitwig Studio Config - Send clock to Virtual Port on Windows

Bitwig Studio Config – Send clock to Virtual Port on Windows

NOTE #1: You can check our support site for additional guides like Setting MIDI Devices to learn how we added JP-8000 vMIDI In and JP-8000 vMIDI Out ports in the DAW.

Insert the plug-in

Drag’n’drop the plug-in from the Devices Browser window to a instrument track.

Bitwig Studio Config - Drag the plug-in to Arrangement

Bitwig Studio Config – Drag the plug-in to Arrangement

Plug-in window will now appear.

Bitwig Studio Config - Plug-in Window will Appear

Bitwig Studio Config – Plug-in Window will Appear

MIDI IN / MIDI OUT

Now we can select the Physical MIDI input port which receives MIDI data from your synthesizer.

Bitwig Studio Config - Assign MIDI Input

Bitwig Studio Config – Assign MIDI Input

And then we choose the Physical MIDI Out port which sends data to the synthesizer MIDI input.

Bitwig Studio Config - Assign MIDI Output

Bitwig Studio Config – Assign MIDI Output

Plug-in will now attempt to establish connection with the synthesizer, so it might take some time if your settings are not right or if you chose a wrong MIDI port by mistake. You should see plug-in saying PROCESSING… somewhere in the plug-in interface and also ABORT PROCESS button will appear.

Bitwig Studio Config - Plug-in Attempts to connect

Bitwig Studio Config – Plug-in Attempts to connect

If all of the settings are correct, you will see “Plug-in is ready to go!” [1] message in the plug-in display.

Bitwig Studio Config - Connection Established

Bitwig Studio Config – Connection Established

If something is wrong with your settings, plug-in will say “No response from JP!” [1] and that indicates something is wrong with your synth settings, MIDI device or Bitwig Studio Preferences.

Bitwig Studio Config - Failed Connection

Bitwig Studio Config – Failed Connection

Once the connection is in, you should sync the data with your hardware. Usually this function can be ran from the patch librarian tab / page of the plug-in & “Sync Data From HW” button. Check the plug-in user manual to learn more.

We can now close the plug-in window and move on.

NOTE #1: Check troubleshooting from the plug-in, daw or synthesizer manual if you can not establish connection. You can also seek help from our support site if you can’t find out what is causing error in your setup.

Assign MIDI tracks to Bitwig Studio arrangement

Now, in order to send MIDI notes to the synthesizer, we need to have MIDI tracks in the DAW. 

Click the “+” icon in the track list window to show the menu.

Bitwig Studio Config - Add New Tracks to Arrangement

Bitwig Studio Config – Add New Tracks to Arrangement

Choose Bitwig [1] -> Hardware [2] -> HW Instrument [3].

Bitwig Studio Config - Choose Track Types

Bitwig Studio Config – Choose Track Types

Assign MIDI Out port [1] where your synthesizer is connected. If you use Windows and you’ve setup vMIDI Out port, choose that instead of physical MIDI port. See image below.

Bitwig Studio Config - Assign MIDI Ports

Bitwig Studio Config – Assign MIDI Ports

Rename the device to reflect your unit and add the channel id to it. Easier to spot it in the arrange later on. I’ve renamed my device to “JP-8000 ch1” which sends to my JP-8000 Lower layer.

Bitwig Studio Config - Rename and Add Color to your Tracks

Bitwig Studio Config – Rename and Add Color to your Tracks

Now I’m going to duplicate the track. Right click on the HW Instrument [1] and choose “Duplicate” [2].

Bitwig Studio Config - Create Duplicate of the Track if Needed

Bitwig Studio Config – Create Duplicate of the Track if Needed

Choose the MIDI out channel [1] to reflect the next part / layer in the hardware and rename [2] the devices to reflect the hardware setup. I will rename my device to “JP-8000 ch2”.

Bitwig Studio Config - Change the MIDI Channel to Reflect New Layer

Bitwig Studio Config – Change the MIDI Channel to Reflect New Layer

Now MIDI setup is done, and we can move on!

Note #1: If you have multitimbral setup / use with your synthesizer, which most can do, then add more MIDI tracks and point them to respected MIDI channels.

Automating Plug-in Parameters

Click the instrument channel and toggle on “Automation” [1]. See image below.

Bitwig Studio Config - Toggle On Track Automation

Bitwig Studio Config – Toggle On Track Automation

Now there is a new track below the instrument track indicating Filter Cutoff automation with lane on the arrangement I’ve drawn with the pencil tool.

Bitwig Studio Config - Start Automating

Bitwig Studio Config – Start Automating

Note #1: You can configure as many parameters as you wish. System Exclusive (SysEx) parameters and system buttons can not be automated.

Note #2: For some unknown reason, it is not yet possible to draw automation in any DAW when moving the knob from the hardware. It has to be done with the plug-in user interface.

Start drawing in OR move the knobs in the plug-in while recording to make automation! Before you start to pursue with MIDI blocks, read the next chapter!

Finishing it up!

Final step is to add Audio track, so we can hear the synthesizer in action. Click the Audio track in the arrangement window [1], rename to represent your hardware input [2].

Select appropriate Audio Inputs and turn on the track monitoring [3]. Remember to select the inputs where your synth Audio Output is connected!

Bitwig Studio Config - Setting Up for Input Monitoring

Bitwig Studio Config – Setting Up for Input Monitoring

Now you should hear the Audio from your synth while making some MIDI blocks and you have some sort of automation (if needed).

Bitwig Studio Config - Everything Runs like well Oiled Machine

Bitwig Studio Config – Everything Runs like well Oiled Machine

Note #1: You might have routed your Audio Output from the synth itself to external mixing desk or speakers, so make sure you power those units on. Otherwise there won’t be any sound because our plug-in does not transmit any audio data to the DAW.

Thats it for the Bitwig Studio user guide. We hope you find this useful.

You have some suggestions? Yes please!

We are always open for new suggestions and ideas regarding to our products. Send your suggestions to us because it will make our products better.

Head down to our main site and drop your idea in, we will have a look at it and let you know if it can be done.

Thank you.

Plug-in user manuals: https://docs.mysteryislands-music.com/

Plug-in updates: https://www.mysteryislands-music.com/downloads/

Troubleshooting

loopMIDI and MIDI-OX are both shipping their own user manuals, so please refer to their documentary to learn more about how they work.

If you have found an error in this document, open a support ticket so we can have it fixed ASAP.

Open Support Ticket

0
0
986
Rate this article

Spread the word with your community ❤️ Thank you!

0 Shares
Tweet
Share
Reddit
Share
Share