Configuration articles and guides for software and hardware. These settings are mandatory unless otherwise stated
v1.0.0 – 2020-03-12
Configuration guide for Windows and macOS to use with our Editor & Librarian plug-ins
Reason Studios Reason User Guide
Adobe Acrobat Reader PDF format
In this little Reason Studios Reason User Guide you will find the instructions to get our plug-in to work with Reason Studios Reason with ease. This is universal tutorial for all of our plug-in, but we are using our Roland JP-80×0 plug-in in this guide.
Checkout the plug-in user manual prior to this guide, so you have the knowledge to setup the plug-in properly.
Also, as we are not Reason Studios Reason experts, we engourage you to read the Reason manual in order to fully understand your DAW.
We hope you have taken all the necessary precautions prior to using our product, like making a full backup of your synthesizer memory.
Our company & plug-in has nothing to do with Reason Studios company, so please don’t bug them if you encounter issues with the plug-in – open a support ticket in your account page in such case. You can find support details at the end of this document.
Support and plug-in updates are free for life to anyone who has bought the license from our store
Reason Studios Reason
Open your DAW and enter Preferences. We will make sure that MIDI ports are disabled for those ports, where your synthesizer is connected at. This will ensure that your DAW won’t crash and we won’t be getting double data in to the DAW processing loop.
Edit -> Preferences…
MIDI Port Setup
Open Control Surfaces tab in Preferences. Locate the Input port, which receives MIDI from your synth. Now check that the physical input port has the checkbox toggled OFF so that is not Enabled.
Example: My JP-8000 MIDI Out sends MIDI to RayDAT Port 1 Input. I did previously disable that port, so therefore it is not even showing up anymore.
Windows: Do the same for JP-8000 vMIDI Out  we created in Setting MIDI Devices User Guide.
Windows: Now we can add the master keyboard connection in. If you already have the master keyboard connection from your synthesizer, we made the plug-in for, remove it. Create new connection – see below.
Add manually , Manufacturer  to < Other >, set Model to MIDI Control Keyboard, name it and set the MIDI Input  to JP-8000 vMIDI In (or which ever vMIDI port you’ve created). Click OK to add it.
Now the new master keyboard is in and it is receiving MIDI data from loopMIDI port / MIDI-OX routing.
Before we close Preferences, open Sync tab. Check and make sure that the hardware physical MIDI port is not assigned in External control busses  or in the MIDI clock sync  dropdown menus.
NOTE #1: You can check our support site for additional guides like Setting MIDI Devices to learn how we added JP-8000 vMIDI In and JP-8000 vMIDI Out ports in the DAW.
Insert the plug-in
Click to view the Rack and choose the “+ ADD DEVICE” option.
Locate the plug-in you are using from the plug-ins drop down menu. See image below.
Rack unit is now in place, click “OPEN”  to view the plug-in interface.
Plug-in window will now appear.
MIDI IN / MIDI OUT
Now we can select the Physical MIDI input port which receives MIDI data from your synthesizer.
And then we choose the Physical MIDI Out port which sends data to the synthesizer MIDI input.
Plug-in will now attempt to establish connection with the synthesizer, so it might take some time if your settings are not right or if you chose a wrong MIDI port by mistake. You should see plug-in saying PROCESSING… somewhere in the plug-in interface and also ABORT PROCESS button will appear.
If all of the settings are correct, you will see “Plug-in is ready to go!”  message in the plug-in display.
If something is wrong with your settings, plug-in will say “No response from JP!”  and that indicates something is wrong with your synth settings, MIDI device or Reason Preferences.
Once the connection is in, you should sync the data with your hardware. Usually this function can be ran from the patch librarian tab / page of the plug-in & “Sync Data From HW” button. Check the plug-in user manual to learn more.
We can now close the plug-in window and move on.
NOTE #1: Check troubleshooting from the plug-in, daw or synthesizer manual if you can not establish connection. You can also seek help from our support site if you can’t find out what is causing error in your setup.
Assign MIDI tracks to Reason arrangement
Now, in order to send MIDI notes to the synthesizer, we need to have MIDI tracks in the DAW.
Click the “+ ADD DEVICE” option in the rack window to show the menu again.
Choose Instruments -> Built-in Devices -> MIDI Out Device.
Assign MIDI Out port  where your synthesizer is connected. If you use Windows and you’ve setup vMIDI Out port, choose that instead of physical MIDI port. See image below.
Rename the device to reflect your unit and add the channel id to it. Easier to spot it in the arrange later on. I’ve renamed my device to “JP-8000 ch1” which sends to my JP-8000 Lower layer.
Now I’m going to duplicate the device. Right click on the MIDI Out device  and choose “Duplicate Devices and Tracks” .
Choose the MIDI out channel  to reflect the next part / layer in the hardware and rename  the devices to reflect the hardware setup. I’ve renamed my device to “JP-8000 ch2”.
Now MIDI setup is done, and we can move on!
Note #1: If you have multitimbral setup / use with your synthesizer, which most can do, then add more MIDI tracks and point them to respected MIDI channels.
Automating Plug-in Parameters
Open the plug-in interface and click “Automate” . See image below.
“Automate”  button is now active, and you can click any parameter to toggle the parameter in the arrange automation lane view. I’ve selected “Filter Cutoff” .
Now there is a new track below the instrument track indicating Filter Cutoff  automation with lane on the arrangement.
Note #1: You can configure as many parameters as you wish. System Exclusive (SysEx) parameters and system buttons can not be automated.
Note #2: For some unknown reason, it is not yet possible to draw automation in any DAW when moving the knob from the hardware. It has to be done with the plug-in user interface.
Start drawing in OR move the knobs in the plug-in while recording to make automation! Before you start to pursue with MIDI blocks, read the next chapter!
Finishing it up!
Final step is to add Audio track, so we can hear the synthesizer in action. Click to view the “Mixer” window. Right click in the mixer view and add “Create Audio Track”.
Select appropriate Audio Inputs . Remember to select the inputs where your synth Audio Output is connected!
Rename the track  to identify it in the arrange and toggle on Monitoring  for the Audio Track. Now you should hear the Audio from your synth while making some MIDI blocks and you have some sort of automation (if needed).
Note #1: You might have routed your Audio Output from the synth itself to external mixing desk or speakers, so make sure you power those units on. Otherwise there won’t be any sound because our plug-in does not transmit any audio data to the DAW.
Thats it for the Reason Studios Reason user guide. We hope you find this useful.
You have some suggestions? Yes please!
We are always open for new suggestions and ideas regarding to our products. Send your suggestions to us because it will make our products better.
Head down to our main site and drop your idea in, we will have a look at it and let you know if it can be done.
Plug-in user manuals: https://docs.mysteryislands-music.com/
Plug-in updates: https://www.mysteryislands-music.com/downloads/
loopMIDI and MIDI-OX are both shipping their own user manuals, so please refer to their documentary to learn more about how they work.
If you have found an error in this document, open a support ticket so we can have it fixed ASAP.