Pulse2X User Manual - Advanced MIDI Settings

Waldorf Pulse2X Make The Connection (EN) Chapter 3

User Manuals Knowledge Level

Everything you need to know about our plug-in install, setup steps, configuration and usage of various features

for Waldorf Pulse2X Editor & Librarian plug-in by Mystery Islands Music

v1.0.1 – 2020-03-30

Waldorf Pulse2X User Manual

Adobe Acrobat Reader PDF format

Pulse2X MAKE THE CONNECTION, AGAIN

Selecting MIDI In and MIDI Out

First choose MIDI IN [1], where your Pulse 2 MIDI Out is connected in at. Then choose MIDI OUT [2] which will send data to your Pulse 2 MIDI Input.

Pulse2X User Manual - Setting MIDI Input and Output

Pulse2X User Manual – Setting MIDI Input and Output

After setting MIDI OUT, plug-in will scan for the hardware and auto-detect the Device ID if there is no immediate response. Plug-in Control Display [1] will say “Plug-in is ready to go!”, when system settings are received from the Pulse 2.

Pulse2X User Manual - Auto Detect Model

Pulse2X User Manual – Auto Detect Model

Advanced MIDI Settings

We included Advacend MIDI Settings function to Pulse2X plug-in so that you can control which messages gets processed and which do not. You can open Advaced MIDI Settings window from by clicking ADV. MIDI SETTINGS [1]button in the plug-in user interface.

 

Pulse2X User Manual - Open Advanced MIDI Settings

Pulse2X User Manual – Open Advanced MIDI Settings

 

You can block messages being processed from DAW or from the Synthesizer itself. Settings seen in the image below are default values.

 

Pulse2X User Manual - Advanced MIDI Settings

Pulse2X User Manual – Advanced MIDI Settings

Synchronize DATA from your synthesizer to plug-in

Open PATCH LIBRARIAN [1] window and click SYNC DATA FROM HW [2] button to request current Patch data to the plug-in user interface.

 

Pulse2X User Manual - Librarian Functions

Pulse2X User Manual – Librarian Functions

 

Plug-in will now request the currently active hardware data to the plug-in user interface. This is quite important in order to make program changes and / or send data to your synthesizer from the librarian.

Plug-in Control Display [1] will show “Data request completed!” message once data has been synchronized. Now you can tweak your sounds as you wish.

Pulse2X User Manual - Successful Connection

Pulse2X User Manual – Successful Connection

 

If something in your settings is wrong, Plug-in Control Display [1] will inform you that the process has timed out or no response from Pulse 2!

Pulse2X User Manual - No Response

Pulse2X User Manual – No Response

 

TIP #1: Be patient and do not disturb the data flow with any knob movements or so. This will ensure the data packages are being sent as supposed and you are not going to receive any SysEx error messages! While making changes to your patch, might be good to stop playback too.

Previously in Pulse2X User Manual

Getting Started

et|icon_book_alt|

Chapter 3 of 6

Next in Pulse2X User Manual

Main Functions

0
0
267
Rate this user guide

Spread the word with your community ❤️ Thank you!

0 Shares
Tweet
Share
Reddit
Share
Share